TH 105
Information Technology

Theatre 105

About this room's tech

AV equipment in this classroom

• Data Projector
• Computer (will also play DVDs)
• VHS/DVD Player

To project the computer

Turn ON the projector with the projector remote control. If you don't see the computer image projected after the projector has warmed up try pressing the Input button on the projector remote control and select Computer. Also the laptop switch button should be steady and not flashing.

If it is flashing (laptop mode) press the button until it is not flashing. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled Computer is turned up. You may also need to adjust the volume controls on the computer. 

To turn off the projector press the power button once and then again to confirm.

Projecting a DVD

Turn ON the projector with the projector remote control. After logging onto the computer insert the DVD into the Disc drive and choose VLC from the list of DVD player programs. If you don't see the computer image projected after the projector has warmed up try pressing the input button on the projector remote and select Computer. A DVD can also be played in the VCR/DVD combo player. Press the input button on the projector remote and select Video. For sound make sure the amplifier (below the Computer) power is on, the master volume turned up to @ 7, and the volume control labeled computer is turned up. You may also need to adjust the volume controls on the computer. 

To turn off the projector press the power button once and then again to confirm.

Connecting a laptop

By the computer monitor there is a spare male 15 pin (VGA) connector that plugs into the laptop. Turn ON the projector with the remote control kept by the computer. Press the input button on the projector remote and select Computer.​

Locate the Laptop switch button also by the monitor and press it until it is flashing (Laptop mode.)

For laptop sound connect the spare audio cable by the monitor into the laptop headphone connection. Make sure the amplifier (by the computer) power is on, the master volume turned up to @ 7, and the volume control labeled laptop is turned up. You may also need to adjust the volume controls on the laptop.

To turn off the projector press the power button once and then again to confirm.